256 7 Maintenance
Resetting the Counter
After replacing the 200k Maintenance Kit, perform the required control panel operations to
reset their respective counters.
When replacing the 200k Maintenance Kit, be sure to reset the counter on the control panel.
1. On the control panel, press the < > and
<OK> buttons at the same time.
This displays the [Consumables Menu].
2. Press the < > until [Reset Counter]
appears.
3. Press either the < > or <OK> button to
select so [Fuser Assembly] is displayed.
4. Press either the < > so [Tray Feed Roller]
is displayed.
5. Press either the < > or <OK> button to
select.
6. Press the <OK> button.
7. This resets the counter for the Tray Feed
Roller.
8. Press the <Settings> button to close
themenu.
Consumables Menu
Serial number...
Consumables Menu
Reset Counter
Reset Counter
Fuser Assembly
Reset Counter
Tray Feed Roller
Press OK to reset
Tray Feed Roller
Resetting Tray Feed
Roller...
Resset completed for
Tray Feed Roller
To Next Page
Loading...
