Fuji Xerox DocuPrint 3105

7.3 Checking the Meter Reading 265
Initializing [Meter Report (Print Jobs)] Data
1. Press the <Printer Settings> button on the
control panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
3. Press the < > or <OK> button to select.
[Network / Port] is displayed.
4. Press the < > button until [Init/Delete
Data] is displayed.
5. Press the < > or <OK> button to select.
[NVM] is displayed.
6. Press the < > button until [Print Meter] is
displayed.
7. Press the < > or <OK> button to select.
A process start confirmation screen is
displayed.
8. Press the <OK> button.
Data is initialized.
9. After the process is finished, press the
<Printer Meter> button to return to the
[Ready to print] screen.
Settings
LanguageEmulation
Settings
Admin Menu
Admin Menu
Network / Port
Admin Menu
Init/Delete Data
Init/Delete Data
NVM
Init/Delete Data
Print Meter
Print Meter
Use OK to init