284 7 Maintenance
3. On the menu on the left, click [Security] > [Watermark] > [Universal Unique ID].
The [Universal Unique ID] screen is displayed.
4. Configure the settings.
5. After all the settings are completed, click [Apply].
Setting Description
Print Universal Unique ID Specifies whether or not to print the UUID.
•[No]
•[Yes]
Print Position Specifies the Universal Unique ID print position.
• [Top Left], [Top Center], [Top Right], [Bottom Left], [Bottom Center],
[Bottom Right].
Print Position Adjustment
(Length Y)
Allows fine adjustment of the UUID vertical print position in the range of
0 to 100 mm.
Print Position Adjustment
(Width X)
Allows fine adjustment of the UUID horizontal print position in the range
of 0 to 200 mm.
Note
• With 0 mm as the edges of the paper, a larger fine adjustment value
shifts the print position more towards the center of the paper. When
[Top Center] or [Bottom Center] is selected as the print position,
however, the horizontal fine adjustment value for the center of the
paper is 100 mm. When [Top Center] or [Bottom Center] is selected as
the print position, first set the fine adjustment value to 100 mm and
then make fine adjustments.
Print Position (Side 2) Specifies the reverse side UUID print position.
• [Same as Side 1]
• [Mirror Side 1]
To Next Page
Loading...
