3.3 Printing on Custom Size or Long-size Paper 69
5. Select custom items to be set from the list box for paper name and size.
Note
• In the case of Windows 7, select the name of the paper for which a custom size is to be registered from
[Custom 1] to [Custom 20].
• If changing paper name, select the [Create a New Form] check box and then enter a name in [Paper
Name]. A paper name can be up to 31 single-byte characters long.
6. Specify the length for [Width] and [Length].
Use key input or the [ ] and [ ] keys to specify the lengths.
Even if the [Width] setting is within the allowable range, you cannot specify a value
that is greater than the [Length] setting. Conversely, even if the [Length] setting is
within the allowable range, you cannot specify a value that is less than the [Width]
setting.
7. To define other custom paper sizes, repeat Steps 5 to 6 of this procedure.
8. Click [Save].
Note
• Proceed to step 10 when registering with a new paper name.
9. Click [Yes].
10. Click [Close].
11. Click [OK].
To Next Page
Loading...
