Important notes
Transporting your notebook
● Remove all data carriers (e.g. CD) from the drives.
● Switch off the notebook with the Suspend/Resume button (see "
Switching on the notebook").
● Unplug the mains adapter and all external devices from the power socket.
● Disconnect the mains adapter cable and the data cables for all external devices.
● Close the connector covers.
● Close the LCD screen so that it locks into place.
● If the device needs to be shipped, use the original packaging or other suitable packaging to
protect it from damage caused by mishandling.
● To protect the notebook against damaging jolts and bumps, use a notebook carrying case to
transport your notebook.
● Current offers can be found on the Internet under
www.fujitsu-siemens.com/accessories.
● Protect the notebook from severe shocks and extreme temperatures (e.g. direct sunlight in a
car).
Cleaning
► Switch the notebook off.
► Pull the power plug of the network adapter out of the mains outlet.
► Remove the battery.
Do not clean any interior parts yourself; leave this job to a service technician.
!
Do not use any cleaning agents that contain abrasives or may corrode plastic. The use of
improper cleaning agents can damage the markings on the keyboard and the notebook,
the paintwork of the device or the device itself.
Ensure that no liquid enters the notebook.
Cleaning the surface of the casing and the fingerprint sensor
Wipe the casing with a dry cloth.
If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully
wrung out.
Cleaning the touchpad
To clean the touchpad, you can use disinfectant wipes.
Cleaning the screen
To clean the screen, gently wipe its surface with a soft Microfiber
®
cloth.
6 A26391-K220-Z122-1-7619, edition 1
To Next Page
Loading...
Need help?
General
