Settings in the BIOS Setup
BIOS Setup: exiting
To exit BIOS Setup, select the Exit menu from the menu bar. You can then decide which settings you
want to save. The
Exit menu offers the following options.
You must mark the required option and activate it with the Enter key.
Exit BIOS Setup Saving Changes
Select Exit Saving Changes and Yes to save the current settings and exit the BIOS Setup. The device is
rebooted and the new settings come into effect.
Exit Bios Setup Discarding Changes
Select
Exit Discarding Changes and Yes to discard the changes you have made. The settings which
were in force when
BIOS Setup was called remain effective. BIOS Setup is terminated and the device is
rebooted.
Load Setup Default
To revert all the menus of
BIOS Setup to the default entries, select Load Setup Default and Yes.
Discard Changes
To load the values of all the menus of
BIOS Setup that were in effect when BIOS Setup was called,
select
Discard Changes and Yes. If you want to exit BIOS Setup with these settings, select Exit Saving
Changes
and Yes.
Save Changes
To save settings without exiting
BIOS Setup, select Save Changes and Yes.
84 A26391-K220-Z122-1-7619, edition 1
To Next Page
Loading...
Need help?
General
