Using your notebook
Decreasing screen brightness
F6
Fn
+
This key combination decreases screen brightness.
Increasing screen brightness
Fn
+
F7
This key combination increases screen brightness.
Decreasing the volume
F8
Fn
+
This key combination reduces the volume of the integrated loudspeakers.
Increasing the volume
F9
Fn
+
This key combination raises the volume of the integrated loudspeakers.
Switching between screen outputs
Fn
+
F10
If an external monitor is connected, the monitor on which the output is to be
displayed can be selected with this key combination.
You can opt to use:
● just the notebook's LCD screen
● just the external monitor
● both the LCD screen and the external monitor.
Press the key combination several times to switch through all possible settings.
If you have connected two external monitors to the port replicator, the following
display outputs are possible:
● just the notebook's LCD screen
● just the external monitor (analog)
● both the LCD screen of the notebook and the external monitor (analog)
● just the external monitor (digital)
● both the LCD screen of the notebook and the external monitor (digital)
You cannot switch output to both external monitors on the Port Replicator via
the key combination.
+
Ctrl
C
Halt an operation
This key combination can be used to halt an operation instantly without clearing
the keyboard buffer.
Backtab
+
This key combination moves the cursor back to the previous tabular
stop.
A26391-K220-Z122-1-7619, edition 1 35
To Next Page
Loading...
Need help?
General
