System expansions
1
2
► Push the retaining clip (1) towards the slot cover to unlock it, then move
it towards the back panel of the device.
► Pull the slot cover out of th e slot in the direction of the arrow (2).
Do not throw away the slot cover. For cooling, p rotection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
2
1
► Push the board into the slot (1).
► Swi
vel the retaining clamp back again until you feel it click into place (2).
66 Fujitsu
To Next Page
Loading...
