System expansio ns
1
► For long PCI boards: Insert the upper part of the card holder in the guide
(1) and slide it to the edge of the gu ide.
► If necessary, connect the cables to the board.
► For display adapters with an additional power supply, observe the notes in section
"
Connecting display adapters with additional power supply", Pag e 72.
If you have installed or remove d a board , please check the relevant slot
settings in the BIO S Setup. If necessary, change the s ettings. Further
information is provided in the board documentation.
Fujitsu 67
To Next Page
Loading...
