Getting started
Connecting the mouse
You can connect a USB mouse or a PS/2 mouse to your device.
Mouse,Connecting,
Connecting a USB mouse
► Connect the USB m ouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS/2 mouse
► Connect the PS/2 mouse to the PS/2 mouse po rt of the device.
PS/2mouse,Connecting,PS/2mouse,
Connecting the keyb oard
Depending on the eq uipme
nt level selected, your device will be supplied with
a USB keyboard or a PS/2 k
eyboard.
Keyboard,Connecting,
Connecting a USB keyboa
rd
Use the supplied keyboard cable only.
USBport,Connecting,
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Plug the fla t rectang
ular U SB connector of the keyboard cable into a USB port of the device.
USBport
Connecting a PS/2 keyboard
Use the supplied ke
yboard cable only.
ConnectingaPS/2keyboardConnecting,
► Plug the rectang
ular connector of the keyboard c able into the rectangular socket
on the underside
or on the rear of the k eyb oard.
► Plug the round connector of the keyboard cable into a keyboard port of the device.
Keyboard,
Connecting external devices to the parallel or
serial interface (optional)
ParallelportSerialportParallelportSerialportExternaldevicesDevices
External devices can be connected to the parallel or serial port (e.g. a printer or a scann er).
► Connect the data c able to the external device.
► Depend ing on the device, connect the data cable to the parallel port or the serial po rt.
For an exact description of how to connect external devices to the corresponding
port, please re fer to the documentation of the external device.
Port settings
ParallelportSerialport,
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.
Fujitsu 19
To Next Page
Loading...
