System expansio ns
Removing an accessible drive
► Open the casing (see "Opening the casing", Page 35).
2
1
► Disconnect the cables connected to the drive.
► Slide the clip in the direction of the arrow (1).
► Pull the drive out of the casing in the direction of the arro w (2).
1
► Rem ove the drive cove r from the drive (1).
1
► Place the drive cover on the holder in the direction of the arrow (1).
► If ne
cessary, make the r equired settings on the remainin g hard disk drives.
► C lose the casing (see "
Closing the casing", Page 36).
Fujitsu 47
To Next Page
Loading...
