Fujitsu CELSIUS W570power - Mainboard Expansions; Upgrading Main Memory; Replacing the Processor

System expansions
Mainboard expansions
Details on how to upgrade the main memory or the processor of your device
can be found in the manu al for the mainboard.
UpgradesLithiumb atteryProces sorMainmemoryMainboard
Upgrading main memory
► Open the casing (see "Opening the casing", Page 35).
Mainmemory
► FUJIT S U Workstation C EL SIUS W570+ / W580power+: Open the drive cage
(see "
Open the drive cage " , Page 38) and pull th e drive cage out of the casing
(see "
Pull the drive cage out of the casing.", Page 39).
► Upgrad e the main memory according to the description in the manual for the mainboard.
► FUJIT SU Workstation CELSIUS W570+ / W580power+: Insert the drive cage
into the casing (see "
Slide the drive cage into the hou sing.", Page 40) and close
the drive cage (see "
Close the drive cage", Page 41).
► Close the casing (see "
Closing the casing", Page 36).
Replacing the processor
► Open the casing (se
e "
Opening the casing", Page 35).
► Remove the heat sink (see "
Removing the heat sink", Page 78).
► Replace the proce
ssor as described in the manual for the mainboard.
► Install the heat sink again (see "
Installing the heat sink", Page 79).
► Close the casin
g(see"
Closing the casing", Page 36).
80 Fujitsu