System expansions
Overview of the drive bays and drives in y our device
The casing has space for seve ral acce ssible and non-accessible drives:
• One installation slot for a slim-line drive
• One installation slot for a n accessible 5
1
/
4
-inch drive
• One installation slot for a M.2 module
• Non-operable hard disk drives, de pending on th e device variant an d the version level /
installation kit used ("
Overvie w of the hard dis k drives", Pag e 48)
"Accessible drives" are e.g. DVD or CD ROM drives, into which a data medium can be
inserted from outside. "Non-accessible drives" are for example hard disk drives.
Install and remove the slim-line drive
Installing an accessible drive
To use the locking function of the slimline drive , you must fit the appropriate drive
plate on the drive before installing the drive in the c asing.
► Open the casing (see "
Opening the casing", Page 35).
► If you have already fitted a cover (optional), remove it.
Do not throw away the cover. For cooling and prote ction aga inst fi re you must refitthe
cover if you remove the drive again later (see "
Removing an accessible drive", Page 47).
1
a a
b
1
► Take the drive cover (a) out of the holder in the dire ction of the arrow (1).
► Attach the drive cover (a) to the slim-line drive (b).
42 Fujitsu
To Next Page
Loading...
