System expansio ns
Installing and removing WLAN an
tennas
If you have installed a suitable low-profile board, you can install and remove the
associated WLAN antennas as described below.
Operation of WLAN antennas is not permitted in Taiwan.
Installing external WLAN antennas
• A suitable board is installed (see "I nstalling a board", Page 71).
1
2
3
3
► Working in the direction of the arrow (1), place the W LAN antennas onto
the plug-in positions of the board (2).
► Secu re the WLAN antennas by turning in th e direction of the arrow (3).
► Align the WLAN antennas as required.
Fujitsu 77
To Next Page
Loading...
