Fujitsu CELSIUS W570power - Removing and Installing; CELSIUS W570; W570 Power and W580; W580 Power: According to the Operable; Drive, FUJITSU Workstation CELSIUS W570 Power+; W580 Power+: on the Drive Frame)

System expansio ns
It may be necessary t o modify the entry for the drive in the BIOS Setup.
Removing and installing 2
1
/
2
inch hard disks or
Solid State Discs (SSD) (FUJITSU Workstation
CELSIUS W570 / W570power and W580 / W580power:
according to the operabl
e5
1
/
4
inch drive,
FUJITSU Workstation CELSIUS W570power+ /
W580power+: on the drive fram e)
The procedure is identical for all three device variants and for both installation k its of
the FUJITSU Workstation CELSIUS W570 power+ / W580power+ Only the position
inthecasingisdifferent(see"
Overview of the hard disk drives", Page 48):
The device variant described below is the FUJITSU Workstation
CELSIUS W570power+. / W580power+
For installation in this model, only use the EasyC hange rails designed for this
slot. If no su itable drive has already been installed at the time of delivery,
these rails will already be pre-fitted in the slot.
Fujitsu 59