System expansio ns
Installing the heat sink
► Open the casing (see "Opening the casing", Page 35).
Install the heat sink again in the same way as it was fitted in the
device at the time of removal.
a
1
► Insert the heat sink into the casing (1). In doing so, c orrect ly align the screw holes
on the heat sink with the screw holes on the mainboard.
► Fasten the screw s (a).
► Connect the fan leads to the mainboard (FAN CPU).
► FUJ ITSU Workstation CELSIUS W570+ / W580power+: Insert the drive cage
into the casing (see "
Slide the drive cage into the housing.", Pag e 40) and close
the drive cage (see "
Close the drive cage", Page 41).
► C lose the casing (see "
Closing the casing", Page 36).
Fujitsu 79
To Next Page
Loading...
