Fujitsu CELSIUS W570power - CELSIUS W570 Power+, Cold Plug); Removing the Hard Disk Drive

System expansions
Removingandinstallingharddi
sks in the lower
part of the device (variant: FUJITSU Workstation
CELSIUS W570power+, cold plug)
The following sections apply both to 3
1
/
2
inch hard disks and to 2
1
/
2
inch hard disks.
The only difference between 2
1
/
2
inch drives and 3
1
/
2
inch drives
is the ir EasyChange rails.
Removing the h ard disk drive
In the cold-plug process, the cables connected at the back of the drive will be
disconnected automatically when the EasyChange rails are activa ted, as described below.
► Open the casing (see "
Opening the casing", Page 35).
2
1
1
► Press th e brackets of the EasyChange rails on the hard disk drive in the direction of the
arrow (1) and pull the hard disk drive out of the drive cage in the direction of the arro w (2).
56 Fujitsu