Operation
Indicators on the device
The indicat ors are on the front of the c asin g. Which indicators are available on your
device depends on the configuration level you have selected.
1
3
4
2
No. indicator Description
1, 2 Drive indicators
The indicators light up when the Slim-Line drive or CD-ROM or
DVD drive of the device is accessed. You must never under any
circumstances remove the CD/D VD while the indicator light is on.
3 Power-on indicator Warning: In the energy saving mode, the device must not be
disconnected from the mains, as this can result in a loss of data.
• Indicator is illuminated:
The device is switched on.
• The indicator flashes (depending on device type):
The device is in energy-saving mode. After being switche d on
with the ON /O FF switch, the device powers up or returns to the
state it was in before it entered energy-saving m ode.
• The indicator is not illuminated:
The device is s witched off or disconnected from th e mains. If
the device is ready for operation, it can be switched on with
the ON/OF F switch.
4 Hard disk indicator
The indica tor lights up when the hard disk drive of the device is
accessed.
Fujitsu 23
To Next Page
Loading...
