System expansio ns
Installing and removing the accessible 5
1
/
4
inch drive
Fitting the drive cover for th
e5
1
/
4
inch drive
To use the latch function of the accessible 5
1
/
4
inch drive, you must fit the corresponding
drive cover before installing th e drive in the casing. Proceed as follows:
► Open the casing (see "
Opening the casing" , Page 35).
1
► Remove the drive cover from the bracket in the direction of the arrow (1).
1
► Connect the drive cover to the drive (1).
Fujitsu 45
To Next Page
Loading...
