System expansions
b b
c
4
► Remove the drive cover (b) from the drive (c).
► Insert the drive cover in the direction of th e arrow (4) into the hold er.
► If necessary, make the required settings on the remaining hard disk drives.
► If you are not installing a new drive, reinstall the previously removed cover (optional) for the
purposes of cooling, fire prote ction and to prevent foreign objects from getting into the c asing.
► Close the casing (see "
Closing the casing", Page 36).
It may be necessary to modify the entry for the drive in the BIOS Setup.
44 Fujitsu
To Next Page
Loading...
