System expansio ns
Removing a board
► For long modu les: R emove the front fan (see "Removing and fitting the f r ont fan", Page 69).
► Open the casing (see "
Opening the casing" , Page 35).
Board
► Disconnect the cables connected to the board.
3
1
2
a
► Fold the module lock (a) upwards to open it.
► Loosen the scre
w on the module ( 1), if one is fitted.
Modules in the P
CI Express x16 slot are also secured at the bottom of the
slot with a loc
king latch (2). Push the latch to the side to release the card.
You can then re
move the card as described below.
► Pull the slot cover out of the slot in the direction of the arrow (3).
► Place the board in suitable packaging.
Fujitsu 73
To Next Page
Loading...
