System expansio ns
Removing a hard disk drive
In the cold-plug process, the cables connected at the back of the drive will be
disconnected automatically when the EasyChange rails are activated, as described below.
► Open the d rive cage (see "
Open the drive cage", Page 38).
1
1
► Press outwards the brackets of the EasyChange rails on the hard disk drive in the direction
of the arrow (1), until the levers move upwards and the hard disk is unlocked.
2
2
3
► Press the levers together again (2).
► Pull the hard disk d rive out of the drive cage in the direction of the arrow (3).
Fujitsu 67
To Next Page
Loading...
