System expansio ns
Installing a hard disk drive
► Open the casing (see "Opening the casing", Page 35).
a
a
► Secure the EasyChange rails to the side of the hard disk drive by inserting the
upper pins of the EasyCh ange rail into the corresponding h oles of the hard
disk. The connections (a) face towards the front.
1
a
► Slide the hard disk drive with the EasyChange rails into the drive cage in the
direction of the arrow (1). Make sure that the hard disk drive connections (a)
are pointing o u twards as s hown in the diagram.
► Connect the cables to the hard disk drive (a).
► C lose the casing (see "
Closing the casing", Page 36).
It may be necessary t o modify the entry for the drive in the BIOS Setup.
Fujitsu 55
To Next Page
Loading...
