System expansio ns
Removing and fitting the front fan
In order to remove or fit long componen t groups or an M.2 module, it is recommended to
remove the front fan under the front panel while working on the device.
Removing the front fan
► Instructions: Open th e casing (see "Openin g the casing", Page 35).
► Disconnect the fan cable
from the mainboard.
4
1
2
1
1
1
3
► Release the detents of the front cover (1).
► Remove the front cover from the casing in the direction of the arrow (2).
► Release the detent (3) and slide the fan away from the casing in the direction of the arrow (4).
You can now remove or install the M.2 module or long modules.
Fujitsu 69
To Next Page
Loading...
