Fujitsu D2924 User Manual

Main Menu – System functions
LBA Mode Control
Sets addressing to use consecutive sector numbers (LBA = Logical Block Addressing).
Enabled
If the hard disk supports LBA mo de and it has a capacity of m ore than 5 28 MByte,
then the BIOS uses converted hard disk parameters. This allows the disk’s full
capacity to be used.
Disabled
The BIOS uses the hard disk parameters and supports a maximum capacity of
528 MBytes.
32 Bit I/O - Bus width for data transfer
This field specifies the bu s width for data transfer between the processor and the hard disk controller.
Enabled
The data transfer is 32 bits in width at the PCI bus. This enhances performance.
Disabled
The data transfer is 1
6bitsinwidth.
Transfer mode
Specifies the method used to transfer data from the hard disk to the main memory.
Standard
Fast PIO_1
Fast PIO_2
Fast PIO_3
Fast PIO_4
FPIO 3 / DMA 1
FPIO 4 / DMA 2
UltraDMAMode–TransferSpeed
Performance,increasingHarddisk
Specifies that the hard disk drive should use a fast Ultra DM A transfer mode.
Disabled
The fast Ultra DMA transfer mode is not se t.
Mode0, 1, 2,
3, 4, 5,6
The fast U
ltra DMA transfer mode is set.
SMART Monitoring
Shows whether SMART (Self Monitoring Analysis Reporting Technology)
monitoring is activat ed for the hard disk.
Enabled
SMART monitoring is activated.
Disabled
SMART monitoring is deactivated.
Fujitsu Technology Solutions 15

Fujitsu D2924 Specifications

General

Brand	Fujitsu
Model	D2924
Category	Motherboard
Language	English