Fujitsu D2924 User Manual

Security Menu - Security features
SmartCard user groups
SmartCard
User groups can be set up using SystemLock. This enables several systems to be started using a
single S martCard . A user group consists of at least two systems. Each user that is allowed to start the
systems is provided with a SmartCard. The user can start any of the systems using the SmartCard.
Basic information on setting up user groups
When installing SystemLock,thefirst PC in the user group is set up as a "Single P C".
The Admin SmartCard generated during this process is used to set up the user group.
SystemLock sets up each additional PC as a "Group PC" during installation. When the Admin
SmartCard is inserted, information is read in and the PC is adde d to the user group. The
Admin SmartCard determines which user group the PC belongs to.
If you use FSC-CardOS SmartCards, SystemLock can be administered via the Windows program
"SystemLock Admin". "SystemLock Admin" allows you to conveniently manage System Lock
at the operating system level, create SystemLock Organisat ion Units and Groups, generate
SmartCards for these Org anisation Units or Groups, assign access authorisations for user
cards at various levels and restore access authorisations using remote access. You can also
change the SmartCard’s PIN or PUK for yourself and other users and reactivate blocked cards.
For a detailed description, see the "SystemLock Admin" Help manual.
Admin Card
PC1
Select System -
mode: F3
PC4
3
PC 1
Select System -
mode: F1
Smart Card
PC1
Admin Card
PC1
1
2
PC2
Admin Card
PC1
Select System -
mode: F3
3
PC3
Admin Card
PC1
3
User S
martCards or Super User SmartCards must also be gene rated using SystemLock so
that u
sers can access the systems within the user group. A User SmartCard or Super User
Smar
tCard allows a user to log on to each system w ithin the user group.
Fujitsu Technology Solutions 45

Fujitsu D2924 Specifications

General

Brand	Fujitsu
Model	D2924
Category	Motherboard
Language	English