Fujitsu D2924 User Manual

Power M en u – Energy saving functions
Power On Source: Wake Up Timer – Switch
on according to time
Switchons ystem
Specifies whether the system can be set to switch o n at a particular time or after a
particular period of time. The s witch-on date cannot be specifi ed in BIOS Setup. A suitable
application is required in order to set the switch-on date.
Enabled
The system can be switched on using timer control.
Disabled T he system cannot be switched on using timer control.
Rebooting after a critical system error is not affected by this setting.
Power On Source: Wake Up Time – Switch on according to time
WakeUp Time
Specifies the exact point in time at which the system is to be switched on. 00:00:0 0
Power On Source: Wake Up Mode
WakeUp Mode
Specifies th e switch-on period.
Daily The system is switched on daily.
Monthly
The system is switched on monthly.
Power Failure Recovery – System status
after a power failure
Powerfailu
re,system reaction
Specifies the system behaviour after a restart caused by a power failure.
Always Off
The system sw
itches on briefly, performs a status check (initialisation), and
then switche
soff.
Always On
The system switches on.
Previous Sta
te
The system s w
itches on briefly, performs a status check, and then returns the
mode it was in
before the power failure occurred (ON or OFF ).
Disabled
The system d
oes not switch on.
All wake up s ources are reconfigured during the short initialisation process.
The system can be ’woken up’ via LAN etc. When Disabled is set, the system
can only be ’woken up’ using the pow er-on button .
Fujitsu Technology Solutions 59

Fujitsu D2924 Specifications

General

Brand	Fujitsu
Model	D2924
Category	Motherboard
Language	English