Fujitsu D2924 User Manual

Security Menu - Security features
Set Supervisor Password
► Select
Enter
, to set the supervisor password.
To call up the BIOS setup, you need the supervisor password.
Password: Setup password lock
Requirement: A setup password is installed. The function of the setup
password is speci fied in this field.
Standard
The setup password preve
nts unauthorise d opening of the BIOS setup program.
Extended
The setup password prevents unauthorised opening of the BIOS setup program
and locks the keyboard during device initialisation. This prevents unauthorised
access to the settings of insta lled plug-in cards with their own BIOS. The BIO S
of the plug-in card can only be accessed if the setup password is entered during
initialisation. Entry of the password must be completed by pressing the Enter
key. A request to enter the password does not appear.
Set User Password
To be able to assign the user password, a supervisor password must already be
assigned. The user password prevents unauthorized access to your system.
► Press
Enter
to set up the user password. If you call up the BIOS setup with the
user password, you ca nnot change most menu options.
Password On Boot
Defines if the supervisor or user password must be e ntered before the boot process.
Disabled The system boots, without requiring a password to be entered.
First Boot
The system
s boot s, a password must be ente red during the first boot process.
Every Boot
The syste
ms boots, a password must be entered during every boot process.
Setup Pa
ssword Lock
SystemPassw ordSupervisorpasswordWakeOnLAN, system password
Establishes whether t he system password is bypassed or must be entered
when booting with Wake On LAN.
WOL Skip
The system password is deactivated when booting with Wake On LAN.
Standard
The system password must be entered via the keyboard when bo oting the
operating system.
40 Fujitsu Technology Solutions

Fujitsu D2924 Specifications

General

Brand	Fujitsu
Model	D2924
Category	Motherboard
Language	English