Fujitsu M10 User Manual

Table 3-10
Dimensions between the front and rear columns and scale positions (continued)
Dimension between front and rear columns (mm) Scale position
730 2nd
720 3rd
710 4th
700 5th
690 6th
680 7th
670 8th
660 9th
650 10th
Note -
If you have difficulty laying a thick cable into the cable support, move forward the
fixing location of the cable support to make the work easier.
c. Close the rear door of the rack, and confirm that the cable support does not
interfere. If the cable support interferes with the rear door, remove the cable
support. Even if you remove the cable support, leave the rails secured with
the two M6 screws to the rack.
12.
If the
SPARC M10-4S is used, detach the hook-and-loop fastener strips on the
cable support.
The detached hook-and-loop fastener strips are the four (A in Figure 3-59) on the
right side as viewed from the rear of the chassis.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015118

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English