Fujitsu M10 User Manual

Figure 3-90
Completed PCI expansion unit configuration
3.5 Mounting Optional Components
This section describes the procedures for mounting optional components such as
memory and PCI cards.
If the optional components are ordered together with the chassis, they are shipped
mounted in the chassis. If the optional components are ordered separately, they will
need to be mounted on site. Mount optional components after
mounting the chassis
in the rack.
■
Mounting optional components in the SPARC M10-1
■
Mounting optional components in the SPARC M10-4/SPARC M10-4S
■
Mounting optional components in the PCI expansion unit
3.5.1 Mounting optional components in the SPARC
M10-1
The following table lists the optional components and references for the SPARC
M10-1. For detailed procedures, see the Fujitsu M10-1/SPARC M10-1 Service Manual,
and perform work accordingly. All the references in the table can be found in the
Fujitsu M10-1/SPARC M10-1 Service Manual.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015140

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English