Fujitsu M10 - Confirming the Delivered Components of the SPARC M10-4

Table 3-2
Reference: List of accessories for the SPARC M10-1 (continued)
Name Quantity Remarks
Fujitsu M10/SPARC M10 Systems Important Legal and
Safety Information
1
CPU Activation CD-ROM 1 (*1)
Power cord 2 For 100 VAC or 200 VAC (*2)
Serial cable 1
Rack rail kit 1 set
Cable management arm (CMA) 1
*1 The disk contains the CPU Activation key information.
*2 The power cord is ordered separately (required option), so it may not come with the product.
Table 3-3
Reference: List of accessories for the chassis
Name Quantity Remarks
SPARC M10-4 chassis 1
Fujitsu M10/SPARC M10 Systems Getting Started Guide
(*)
1
Fujitsu M10/SPARC M10 Systems Important Legal and
Safety Information
1
CPU Activation CD-ROM 1 (*1)
Power cord 2 For 200 VAC (*2)
Serial cable 1
Rack mount kit 1 set
Cable support 1 set
*1 The disk contains the CPU Activation key information.
*2 The power cord is ordered separately (required option), so it may not come with the product.
2.
Check for incomplete engagement, incomplete contact, or looseness in the
mounting of a PCI Express card or internal disk that may have been caused
by vibration during transportation or moving of the equipment.
3.2.2 Confirming the delivered components of the
SPARC M10-4
This section describes the confirmation of delivered components of the SPARC M10-4.
1.
Confirm the delivered components by referring to the List of Attachments that
comes with the SPARC M10-4.
Table 3-3 below is a list of accessories for the SPARC M10-4. The accessories may
change without notice.
Chapter 3 Installing the System 69