Fujitsu M10 User Manual

XSCF>

addcodactivation

-F

file:///media/usb_msd/XXXX X_XX.TXT

Above

Key

will

be

added,

Continue?[y|n]:

y
..........

done.
successfully

added

Activation

Key

count

:

10.
XSCF>

showcodactivation

Index

Description

Count

-------

-----------

------


0

PROC

10
7.11.3 Registering a CPU Activation key
CPU Activation keys are provided on the CD-ROM labeled "<model name> CPU
Activation" supplied for system deployment. Have the CD-ROM on hand before
registering a CPU Activation key.
The CPU Activation keys are contained in text files in the "ACTIVATION_KEY"
folder on the CD-ROM. A file for registering the keys as
a batch (XXXXX_XX.TXT)
and another for registering them one at a time (XXXXX_XX_001.TXT, etc.) are
provided. Use either file according to the situation.
The methods of registering a CPU Activation key with the system are as follows:
specify and register the CPU Activation key file; or copy and paste the
CPU
Activation key contents.
How to specify and register the CPU Activation key file
1.
Copy the "ACTIVATION_KEY" contents on the CPU Activation key CD-ROM to
a USB device.
2.
Connect the USB device to the USB connector (where "MAINTENA NCE
ONLY" is printed) on the XSCF unit panel (rear panel) of the mast er XSCF.
3.
Register the CPU Activation key by executing the addcodactivation command
from the
storage location of the key.
The following example specifies the "XXXXX_XX.TXT" file on a USB device to
register CPU Activation keys.
4.
Execute the show coda ctivation command, and confirm that the CPU
Activation key is registered with the XSCF.
How to copy and paste the CPU Activation key contents
1.
Insert the CPU Activation key CD-ROM into the system administration terminal.
2.
Open the ACTIVATION_KEY folder on the CD-ROM.
Chapter 7 Making the Initial System Settings 221

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English