Fujitsu M10 User Manual

Table 1-6
Workflow when connecting the PCI expansion unit (continued)
Step (work time (*1)) Work description Referenc e
3 Prepare the necessary tools/
information for installation.
"3.1 Preparing the Necessary
Tools/Information for Installation"
Required
4 Confirm the delivered components. "3.2.4 Confirming the delivered
components of the PCI expansion
unit"
Required
5 Install the rack. See the manual for each rack.
"3.3.2 Securing the rack"
Required
6Mount the PCI expansion unit in the
rack.
"3.4.3 Mounting
the PCI expansion
unit in a rack"
Required
7If there are optional components,
mount them on the PCI expansion unit.
"3.5.3 Mounting optional
components in the PCI expansion
unit"
Optional (*3)
8 Connect the link ca ble and man agem ent
cable to the PCI expansion unit.
Attach the core to the power cord, and
connect the power cord to the power
supply unit.
"5.3 Connecting Cables to the PCI
Expansion Unit"
Required
(*4)
Initial diagnosis (approx. 45 minutes)
9 Connect the system management
terminal to the chassis that has the PCI
expansion unit
connected to it.
"6.1 Connecting the System
Management Terminal to the Chassis"
Required
10 Turn on the input power. "6.2.2 Turning on the input power
and starting the XSCF"
Required
11 Log in to the SPARC M10 system
connected to the PCI expansion unit.
"6.3 Logging In to the XSCF" Required
12 Perform an initial diagnosis test on the
physical system board (PSB).
"6.7 Performing a Diagnosis Test" Required
13 Check the status of mounted
components.
"6.8 Checking the Component
Status"
Required
*1 Average work time
*2 Time required for mounting optional components is not included.
*3 If the optional components are ordered together with the chassis, they are shipped mounted to the chassis.
*4 It is assumed that a link card is installed in the chassis to which the PCI expansion unit is
to be connected. If a link card is installed on
site, see "Chapter 10 Maintaining the Link Cards" in the PCI Expansion Unit for Fujitsu M10/SPARC M10 Systems Service Manual.
Points to note on configurations with the PCI
expansion unit connected
SPARC M10-1
In either of the following cases, the logical domain configuration of a physical
Chapter 1 Understanding the Installation Flow 13

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English