Fujitsu M10 User Manual

Table 7-4
Setting items related to the XSCF network
Setting item Implemented as
initial setting?
Reference Related command
Host name/domain name Optional "7.5.1 Setting an XSCF host name and
domain name"
sethostname
showhostname
XSCF network IP address
- XSCF-LAN
- Net mask
- Takeover IP address
- SSCP
Implemented "7.5.2 Setting an Ethernet (XSCF-LAN) IP
address"
"7.5.3 Setting a takeover IP address"
"7.5.4 Setting an SSCP IP address"
setnetwork
shownetwork
setsscp
showsscp
Enabling/Disabling the network Optional "3.7.8 Enabling/Disabling the XSCF
network and setting an XSCF-LAN IP
address and net mask" in
the Fujitsu
M10/SPARC M10 Systems System Operation
and Administration Guide.
setnetwork,
shownetwork
Adding/Deleting a network
route
- Destination IP address
- Gateway
- Net mask
Implemented "7.5.5 Setting the routing" setroute
showroute
Adding/Deleting a DNS
- Name server
- Search path
Optional "3.7.13 Setting the DNS for the XSCF" in
the Fujitsu M10/SPARC M10 Systems System
Operation and
Administration Guide.
setnameserver
shownameserver
IP packet filtering rule Optional "3.7.14 Setting the IP packet filtering rules
for the XSCF network" in the Fujitsu
M10/SPARC M10 Systems System Operation
and Administration Guide.
setpacketfilters
showpacketfilters
Applying the network Implemented "7.5.6 Applying network settings" applynetwork
rebootxscf
7.5 Configuring the XSCF Network
The XSCF network settings consist of XSCF network interface settings such as for the
XSCF-LAN and the protocol for SP to SP communication (SSCP), routing settings,
and DNS-related settings. For details on the purpose and configuration of the XSCF
network, see "3.7.1 Using services through the XSCF network" to "3.7.5 Understanding
the IP addresses that are set with SSCP" in the Fujitsu M10/SPARC M10 Systems
System Operation and Administration Guide.
Table 7-4 lists the setting items related to the XSCF network and the corresponding
XSCF shell commands.
Here, set the essential items in the table. This manual does not describe cases
about
setting optional items. See "3.7 Configuring the XSCF Network" in the Fujitsu
M10/SPARC M10 Systems System Operation and Administration Guide.
Chapter 7 Making the Initial System Settings 203

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English