Fujitsu M10 User Manual

XSCF>

version

-c

xcp
BB#00-XSCF#0

(Master)
XCP0

(Current):

2042
XCP1

(Reserve):

2042
BB#01-XSCF#0

(Standby)
XCP0

(Current):

2042
XCP1

(Reserve):

2042
BB#02-XSCF#0
XCP0

(Current):

2042
XCP1

(Reserve):

2042
BB#03-XSCF#0
XCP0

(Reserve):

2042
XCP1

(Current):

2042
XSCF>

version

-c

xcp
BB#00-XSCF#0

(Master)
XCP0

(Current):

2042
XCP1

(Reserve):

2042
BB#01-XSCF#0

(Standby)
XCP0

(Current):

2042
XCP1

(Reserve):

2042
BB#02-XSCF#0
XCP0

(Current):

2041

*

Different

version
XCP1

(Reserve):

2041
BB#03-XSCF#0
XCP0

(Reserve):

2042
XCP1

(Current):

2042
XSCF>

flashupdate

-c

sync
XCP

update

is

started.

[3600sec]


0.....

30.....

60.....

90.....120.....150.....180.....
210.....240.....
270.....300.....330.....360.....390.....420.....450.....480.....
510.....
it so that all the versions are the same.
1.
Execute the version command.
The command comprehensively displays the version.
In a building block configuration of the M10-4S, you can check which is the
master/standby.
The following example shows a building block configuration of the M10-4S.
Here, BB#02 has a different XCP version,
so it must be updated to match the
version. Perform step 2 and subsequent steps.
2.
If the XCP version of a chassis differs, execute the flashupdate -c sync
command to update the XCP version on that chassis.
The command matches the firmware version with the version on the master
XSCF.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015184

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English