Fujitsu M10 User Manual

Table 7-3
User privilege (continued)
User privilege Overview Des cription of privilege
useradm Manage user
accounts.
- Can create, delete, enable, and disable user
accounts.
- Can change user passwords and password
profiles.
- Can change user privileges.
auditop Refer to the audit
status.
Can refer to the XSCF audit status and audit
methods.
auditadm Control auditing. - Can control XSCF auditing.
- Can delete XSCF audit methods.
fieldeng Allow use by
field
engineers.
Permits field engineers to only be able to
perform maintenance work and change
device configurations.
XSCF>

setprivileges

jsmith

useradm

platadm
Note -
The setprivileges command assigns the user privilege of the specified operand.
To add a new user privilege to a user account already assigned a user privilege, specify the
existing user privilege too.
XSCF>

showuser

-l
User

Name:

jsmith

UID:

359
Status:

Enabled
Minimum:

0
Maximum:

60
Warning:

15
Inactive:

-1
Last

Change:

May

22,

2013

Password

Expires:

Jul

21,

2013

Password

Inactive:

Never
Account

Expires:

Never
Privileges:

useradm

platadm
Note
- Considering maintenance work, be sure to prepare a field engineer (FE) user account
that has the fieldeng user privilege.
We recommend that the system administrator create accounts with the platadm, useradm,
auditadm, and fieldeng user privileges.
The following example specifies useradm and platadm for the user account.
4.
Execute the showuser command to check information on a created user
account.
Chapter 7 Making the Initial System Settings 199

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English