Fujitsu M10 User Manual

Table 1-9
Operation for when the installation/removal/replacement of the PCI expansion unit is performed
for the PCI slot of the SPARC M10 chassis for which the direct I/O function has been enabled
Maintenance environment Domain configuration Reconfiguring Oracle
VM Server for SPARC
config
Setting OpenBoot
PROM environment
variables again
When a PPAR is installed/removed
after it has stopped
factory-default Not required Not required
With guest domain Required (XML) Required
When a failed PCI expansion unit is
replaced after the PPAR has stopped
(*1)
factory-default Not required Not required
With guest domain Required (XML) Required
When a normal PCI expansion unit is
replaced after the PPAR has stopped
(*1)
factory-default Not required Not required
With guest domain Not
required Not required
*1 This includes the situation in which a link card, link cable, management cable, or link board is replaced.
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 201516

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English