Fujitsu M10 User Manual

2.4.6 Points of concern when bringing in an expansion rack 35
2.4.7 Method of fixing an expansion rack in place 37
2.5 Checking Environmental Conditions 38
2.5.1 Ambient temperature 39
2.5.2 Ambient relative humidity 39
2.5.3 Contaminant conditions 40
2.6 Checking Acoustic Noise Levels 40
2.7 Checking Cooling Conditions 41
2.8 Checking the Power Input
Type 43
2.8.1 Redundant configuration of power supply units 43
2.8.2 Dual power feed 45
2.8.3 Three-phase power feed 47
2.8.4 Uninterruptible power supply (UPS) connection (optional) 50
2.8.5 Internal rack connections of an expansion rack 51
2.9 Preparing Power Supply Facilities 54
2.9.1 Electrical specifications 54
2.9.2 Power cord specifications 59
2.9.3 Breaker characteristics
60
2.9.4 Grounding requirements 61
2.10 Checking External Interface Port Specifications 62
2.10.1 Network configuration example 65
Chapter 3 Installing the System 67
3.1 Preparing the Necessary Tools/Information for Installation 67
3.2 Confirming Delivered Components 68
3.2.1 Confirming the delivered components of the SPARC M10-1 68
3.2.2 Confirming the delivered components of the SPARC
M10-4 69
3.2.3 Confirming the delivered components of the SPARC M10-4S 70
3.2.4 Confirming the delivered components of the PCI expansion unit
71
3.2.5 Confirming the delivered components of an expansion rack 71
3.3 Installing a Rack 76
Fujitsu M10/SPARC M10 Systems Installation Guide
･
July 2015iv

Fujitsu M10 Specifications

General

Brand	Fujitsu
Model	M10
Category	Server
Language	English