U41615-J-Z156-1-76 19
Important Notes Notes on Safety
I You protect the CD/DVD drive and prevent mechanical damage, as well
as premature wearing of the CDs/DVDs by observing the following
suggestions:
– Only insert the CDs/DVDs in the drive when needed and remove
them after use.
– Store the CDs/DVDs in suitable sleeves.
– Protect the CDs/DVDs from exposure to heat and direct sunlight.
Modules with Electrostatic Sensitive Devices:
Electrostatic-sensitive components may be identified by the following sticker:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
● You must always discharge static build up (e.g. by touching a grounded
object) before working.
● Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
● The equipment and tools you use must be free of static charge.
● Remove the power plug from the power socket before inserting or removing
components containing ESDs.
● Always hold components with ESDs at the edges or at the positions
highlighted in green (touch points).
● Do not touch any exposed pins or conductors on a component.
● Place all components on a static-safe base.
I You will find a detailed description for handling ESD components in the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).
To Next Page
Loading...
