52 U41615-J-Z156-1-76
The Server Switches Itself OFF Problem Solutions and Tips
6.2 The Server Switches Itself OFF
Server management has detected an error
Ê Check the error list or the ErrorLog file in the
ServerView
program, and attempt to eliminate the error.
6.3 The Monitor Remains Dark
Monitor is switched OFF
Ê Switch your monitor ON.
Power saving has been activated (screen is blank)
Ê Press any key on the keyboard.
or
Ê Deactivate screen blanking (screen saver). Enter the appropriate password.
Brightness control is set too dark
Ê Adjust the brightness control to increase the brightness. For detailed infor-
mation, please refer to the operating manual supplied with your monitor.
Power cable or monitor cable not connected
Ê Switch OFF the monitor and the server.
Ê Check whether the power cable is properly connected to the monitor and to
the power socket.
Ê Check whether the monitor cable is properly connected to the server and
monitor (if it is connected with a plug). If a separate graphics card is installed
in the server, then the monitor cable must be connected to the connection
on this graphics card.
Ê Switch ON the monitor and the server.
To Next Page
Loading...
Need help?
General