EasyManuals Logo

Fujitsu Primergy RX100 S3 Operating Manual

Fujitsu Primergy RX100 S3
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
54 U41615-J-Z156-1-76
Time and/or Date are Incorrect Problem Solutions and Tips
Mouse controller disabled
The mouse controller on the system board must be enabled if you use the
supplied mouse.
Ê Check in the BIOS Setup whether the mouse controller is Enabled.
6.7 Time and/or Date are Incorrect
Ê Set the time and/or date in the operating system or in the BIOS Setup.
I If the time and date are repeatedly wrong when you switch on your
server, you must change the lithium battery. Contact our Service group.
6.8 System Fails to Boot
The system will not boot after installing a new hard disk drive.
Ê Reboot the System with the ServerStart CD or with a boot CD and reconfigure
the server (see section “Configuring the Server” on page 46).
6.9 Error Messages on the Monitor
The meanings of the error messages are explained in the manual for BIOS Setup
and in the documentation for the relevant components and programs on the
PRIMERGY ServerBooks CD.

Table of Contents

Other manuals for Fujitsu Primergy RX100 S3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu Primergy RX100 S3 and is the answer not in the manual?

Fujitsu Primergy RX100 S3 Specifications

General IconGeneral
BrandFujitsu
ModelPrimergy RX100 S3
CategoryServer
LanguageEnglish

Related product manuals