U41615-J-Z156-1-76 5
1Introduction
The PRIMERGY RX100 S3 server is an Intel-based server for small and
medium-sized networks and can be mounted into both, rack systems of the
Fujitsu Siemens Computers GmbH and present rack systems from different
manufacturers.
The PRIMERGY RX100 S3 server offers a high level of reliability and availability
through highly developed hardware and software components. These include
the ServerView server management software, Prefailure Detection and
Analyzing (PDA) and Automatic Server Reconfiguration and Restart (ASR&R).
Security functions in the BIOS Setup and on the system board protect the data
on the server against manipulation. Additional security is provided by the
lockable rack door.
The server occupies 1 height unit (HU) in the rack.
1.1 Overview of the Documentation
I PRIMERGY manuals are available in PDF format on the ServerBooks CD.
The ServerBooks CD is part of the ServerView Suite delivered with each
server system.
The PDF files for the manuals can also be downloaded free of charge
from the Internet. The overview page showing the online documentation
available on the Internet can be found via the URL:
http://manuals.fujitsu-siemens.com. For the documentation of the
PRIMERGY servers choose the navigation point industry standard servers.
Concept and Target Group of this Manual
This operating manual describes how to install and how to operate your server.
This operating manual is intended for those responsible for installing the
hardware and operating the system. The manual contains all the information
required for mounting and operating your PRIMERGY RX100 S3.
To understand the different expansion options, you need a knowledge of
hardware and data transmission, as well as basic knowledge of the operating
system used.
To Next Page
Loading...
