U41615-J-Z156-1-76 37
Hardware Installation Connecting the Server to the Mains
4.4.1 Connecting the Monitor
Ê Plug the data cable of the monitor into the monitor port (4).
Ê Connect the insulated connector of the monitor power cable to a grounded
mains socket in the socket strip of the rack (see also the Technical Manual
of the rack).
4.5 Connecting the Server to the Mains
The server has a fixed power supply unit.
V CAUTION!
The server automatically adjusts to a mains voltage between
100 V - 127 V or 200 V - 240 V. The server may be operated only, if the
mains voltage range set on the server corresponds to the local mains
voltage.
Ê Connect the insulated connector of the power cable to the power supply unit
of the server.
Ê Connect the power plug to a insulated socket in the socket strip of the rack
(see also the Technical Manual of the rack).
To Next Page
Loading...
Need help?
General