38 U41615-J-Z156-1-76
Connecting and Disconnecting Cables Hardware Installation
4.6 Instructions on Connecting and
Disconnecting Cables
V CAUTION!
Be sure to read the documentation for the peripheral devices before
connecting them.
Do not connect or disconnect data cables during a thunderstorm.
When removing a cable, always hold it by the plug.
Connect and disconnect the cables in the order described below.
Connecting cables
Ê Turn off all power and equipment switches.
Ê Pull all power plugs out of grounded power sockets.
Ê Plug all cables into the server and peripherals. Secure the data transmission
cable connections (e. g. nut retention).
Ê Plug all data communication cables into the utility sockets.
Ê Plug all power cables into the grounded power sockets.
Disconnecting cables
Ê Turn off all power and equipment switches.
Ê Pull all power plugs out of grounded power sockets.
Ê Unplug all data communication cables from the utility sockets.
Ê Loosen the nut retentions on the connector housings and pull the corre-
sponding cables out from the server and from the peripherals.
To Next Page
Loading...
Need help?
General