48 U41615-J-Z156-1-76
Configuring the Server Preparation for Use/Operation
5.3.3 Configuration without ServerStart
Configuring the SATA RAID controller
RAID levels 0 (striping) and 1 (mirroring) are supported.
Configure the SATA RAID controller before OS loads (POST) with CTRL-M (see
also the LSI SATA Software RAID manual on the ServerBooks CD) or after OS
loads with GAM (Global Array Manager, see also “Related publications” on
page 63).
Installing the operating system
Ê Insert the installation CDs of the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on the screen and in the manual for the operating
system.
Please read how to install the desired operating system in the related LSI SATA
Software RAID manual.
I Please also read the BIOS Setup manual (see also “Related publications”
on page 63).
To Next Page
Loading...
Need help?
General