Fujitsu Primergy RX100 S3 User Manual

161
PRIMERGY RX100 S3 User’s Guide
5
Operations after OS Installation
4 Select an adapter to add to the created team from [Available adapters], click
the [ ] and [ ] buttons, and move the adapter to [Load Balance Members]
or [Standby Member].
 When adding adapter "[0005] Broadcom NetXtreme Gigabit Ethernet", the following message
appears but click [Yes ] and go to the next step. "[0005] Broadcom NetXtreme Gigabit Ether-
net" (port LAN A) is connected to BMC (micro controller for server management) and can con-
trol power supply and other functions via a LAN. When a team is created, communication
function with BMC is not inherited to other adapters.
5 Click [Apply] to apply the settings.
After the network is temporarily disconnected, a window is displayed. Click [Yes (Y)].
When continuing to VLAN settings, go to "5.6.3 VLAN Setup Procedure" (pg.162).

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English