Fujitsu Primergy RX100 S3 - Boot Adapter List

225
PRIMERGY RX100 S3 User’s Guide
8
Configuring Hardware and Utilities
8.2.3 Boot Adapter List
A list of Boot Adapters is displayed. Press the [F2] key from the [Main] menu window, select [Boot
Adapter List] and press the [Enter] key to display the window.
table: Items on the Boot Adapter List Window
Item Setting Description
Boot Order 0 (Unchangeable) Sets the startup priority for SCSI controllers.
Current Status On Sets whether the SCSI controller BIOS is enabled
or disabled.
Next Boot ON (Unchangeable) Sets whether to enable or disable the SCSI
controller BIOS at the next startup.
LSI Logic MPT SCSI Setup Utility Version MPT BIOS-IME-x.xx.xx
Boot Adapter List
Insert=Add an adapter
Hit Insert to select an adapter from this list:
Adaapter PCI DEV/ Boot Current Next
Bus Func Order Status Boot
1020/1030 2 40 [0] On [ON]
1020/1030 2 41 [0] On [ON]
<1020/1030 2 40>
<1020/1030 2 41>
Delete=Remove an adapter
F1 =HELP
Esc=Abort/Exit
ArrowKeys=Select Item
Home/End=Select Item
-/+ =Change [Item]
Enter=Excute <Item>