Fujitsu Primergy RX100 S3 User Manual

202
Chapter 8 Configuring Hardware and Utilities
8.1 BIOS Setup Utility
This section explains settings for the BIOS Setup Utility and items regarding each
setting.
8.1.1 Starting and Exiting the BIOS Setup Utility
The following explains how to start and exit the BIOS Setup Utility.
■ How to Start the BIOS Setup Utility
1 Turn the server on.
"1.4.2 Turning On the Server" (pg.31)
2 During POST, press the [F2] key while the message "<F2>BIOS Setup / <F12>
BOOT Menu" is displayed on the screen.
The [Main menu] window appears when the POST completes.
When the [Main menu] window does not appear
 When the [Main menu] window does not appear because the [F2] is pressed at wrong timing,
press the [Ctrl] + [Alt] + [Delete] keys at the same time to restart the system, then start the
BIOS Setup Utility.
Item Specific Help
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F7
Setup Defaults
Previous Values
Advanced Security Server ExitMain
<Tab>, <Shift-Tab>, or
<Enter> selects field.
System Time:
System Date:
Standard IDE:
Boot Options
Base Memory:
Extended Memory:
[HH:MM:SS]
[MM/DD/YYYY]
[GCR-8483B-(PM)]
640K
***M

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English