Fujitsu Primergy RX100 S3 User Manual

95
PRIMERGY RX100 S3 User’s Guide
3
OS Installation Using ServerStart
13 Click [show Readme file].
The [Readme] window appears. Read the text. When you finish, click [ ] in the upper-right
corner of the window to close the [Readme] window.
14 Click [Next].
The image file is copied.
The image file copying process takes about 10 to 20 minutes.
The installation completes when the installation completion window appears.
15 Click [Start] → [Shutdown]. Select [Restart] and click [OK].
The system restarts.
■ Checking Services
● Checking [PXE Services] and [TFTP Service]
1 Right-click the [My Computer] icon and click [Manage].
2 Select [Services] from [Services and Applications].
On the Services list, check that PXE Services and TFTP Service have been installed and started.

Fujitsu Primergy RX100 S3 Specifications

General

Brand	Fujitsu
Model	Primergy RX100 S3
Category	Server
Language	English