177
PRIMERGY RX100 S3 User’s Guide
Installing Internal Options
7
• Devices inside the server remain hot after shutdown. Wait for a while after
shutdown before installing or removing internal options.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
• If devices are installed using the methods other than those outlined in this
chapter or disassembled, the warranty will be invalidated.
To Next Page
Loading...
Need help?
General